Baotou Steel bag type dust collector
Product description:
With the strengthening of human’s consciousness of environmental protection, people are put more attention to energy conservation, so the enterprise are more required for environment protection and pollution abatement, especially the casting companies. Kaijie as aprofessional casting equipment manufacturer, have developed and produced impulse bag type dust collector and wet type dust collector which are widely used in cupola furnace, electric furnace and pouring line. Dust removal system is necessary for not only the workshop clean but also national environment protection improvement.
Advantages of impulse bag type dust remover:
1. Compartment slide spraying , loop purge timing
2. Bag working temperature 240℃, instant 260℃
3. The removing efficiency more than 95%
4. The emission concentration ≦50mg/Nm3, soot Ringelmann blackness≦ level 1
Parameters of impulse bag type dust collector:
Model |
Bag numbers |
Filtering area |
Air flow |
Motor power |
FD620 |
216pcs |
324㎡ |
30000m³/h |
37kw |
FD621 |
288pcs |
432㎡ |
45000m³/h |
45kw |
FD622 |
360pcs |
540㎡ |
45000m³/h |
55kw |
Non-standard, customized according to production line capacity |
Advantages of wet dust collector :
1. Saving the investment cost
2. Less field area
3. Good desulfurization function
4. The removing efficiency is 95%-98%, the emission concentration ≦150mg/Nm3, soot Ringelmann blackness ≦level 1 , the dust removing effect is up to level 2 environment requirement.
Parameters of wet dust collector:
Non-standard, customized according to production line capacity
Top